Adsense by google:

HC-SR04 Distance Sensor Arduino Source Code

hc-sr04 distance sensor and arduino wire

hc-sr04 distance sensor and arduino wire

HC-SR04 is a proximity sensor that is very widely used.

This sensor is very easy to use because it only needs a simple syntax for programming it. You can view the datasheet and specification of the sensor’s hc-sr04 here.

Sensor HC-SR04 is widely used as a sensor on the robot to detect objects around the robot. In this tutorial, use the Arduino Uno as the processor. While its pin configuration can be seenĀ in the image above.

VCC and GND pins on the sensor is connected to the VCC and GND pins on the Arduino UNO. While Trig pin is connected to digital pin 11 on the Arduino UNO. And echo pin is connected to digital pin 12 on the Arduino UNO.


HC-SR04 Source code :

#define echoPin 7 // Echo Pin
#define trigPin 8 // Trigger Pin
#define LEDPin 13 // Onboard LED

int maximumRange = 200; // Maximum range needed
int minimumRange = 0; // Minimum range needed
long duration, distance; // Duration used to calculate distance

void setup() {
Serial.begin (9600);
pinMode(trigPin, OUTPUT);
pinMode(echoPin, INPUT);
pinMode(LEDPin, OUTPUT); // Use LED indicator (if required)

void loop() {
/* The following trigPin/echoPin cycle is used to determine the
distance of the nearest object by bouncing soundwaves off of it. */
digitalWrite(trigPin, LOW);

digitalWrite(trigPin, HIGH);

digitalWrite(trigPin, LOW);
duration = pulseIn(echoPin, HIGH);

//Calculate the distance (in cm) based on the speed of sound.
distance = duration/58.2;

if (distance >= maximumRange || distance <= minimumRange){
/* Send a negative number to computer and Turn LED ON
to indicate “out of range” */
digitalWrite(LEDPin, HIGH);
else {
/* Send the distance to the computer using Serial protocol, and
turn LED OFF to indicate successful reading. */
digitalWrite(LEDPin, LOW);

//Delay 50ms before next reading.

About authors
We are writers in We present the articles on programming and arduino. You can get information on how to program the microcontroller and arduino. How do I write a script language for arduino and avr microcontroller. Most of the authors is an embedded systems engineer, software engineer, and electrical engineer. If you have questions about microcontrollers and arduino, please contact us at

Comments are closed.