Adsense by google:

SG90 Tower Pro Servo Datasheet

servo-for-arduino-sg90-tower-pro

servo-for-arduino-sg90-tower-pro

One type of electric motor is a servo. Servo motor is used to make mechanical robotic or automated devices. Servo work based on the frequency signal from the controller (such as a microcontroller or arduino).

SG90 Tower Pro servo motor can also be controlled by a ruspberry pi.

You can plug this SG90 Tower Pro Servo straight onto the raspberry pi GPIO pins 4,6,8 without some extra wires. Pin 8 on the raspberry pi is normally the UART Tx pin, so your SG90 Tower Pro servo will not work properly if you connect it without disabling the UART before running the main program, You can search the instructions for how to disabling the UART on pin 8 from google.

sg90 tower pro servo cable pin

sg90 tower pro servo cable pin

Each servo motor cables have different pin configurations. Tower Pro SG90 servo has a three-pin cable. Red cable is wired VCC. Black/brown cable is a ground cable. While the orange cable is a signal cable.

You can find the SG90 Tower Pro servo tutorial and arduino uno source code here.

Summary
SG90 Tower Pro Servo Datasheet
Article Name
SG90 Tower Pro Servo Datasheet
Description
SG90 Tower Pro servo motor can also be controlled by a ruspberry pi. You can plug this SG90 Tower Pro Servo straight onto the raspberry pi GPIO pins 4,6,8 without some extra wires.
Authors
AVRCHIP.COM
avrchip.com
Publisher Logo
About authors
We are writers in avrchip.com. We present the articles on programming and arduino. You can get information on how to program the microcontroller and arduino. How do I write a script language for arduino and avr microcontroller.Most of the authors is an embedded systems engineer, software engineer, and electrical engineer.If you have questions about microcontrollers and arduino, please contact us at writer.avrchip@gmail.com.

Comments are closed.